Cat.No. | Volume(L)
| Cap Style | Size(mm) | /Case | ||
Height | Bottleneck Diameter | Bottom Diameter | ||||
785101 | 2.0 | Seal Cap
| 213.5 | 67 | 162 | 4 |
785111 | 2.0 | Vent Filter Cap
| 213.5 | 67 | 162 | 4 |
786101 | 3.0 | Seal Cap
| 253.5 | 67 | 162 | 4 |
786111 | 3.0 | Vent Filter Cap
| 253.5 | 67 | 162 | 4 |
787001 | 5.0 | Seal Cap
| 285.5 | 90 | 230 | 4 |
787011 | 5.0 | Vent Filter Cap
| 285.5 | 90 | 230 | 4 |
786501(new) |
3L Wide Mouth
| Seal Cap
| 253.5 | 90 | 162 | 4 |
786511(new) |
3L Wide Mouth
| Vent Filter Cap
| 253.5 | 90 | 162 | 4 |
PC Bottle & HDPE Cap & Nylon Handle, Vent caps with 0.2um hydrophobic filters for gas exchange without contamination.
Ideal for shaker culture applications.
New added 3-L wide-mouth high-efficiency Erlenmeyer flask
The bottom diameter
of the 3-L wide-mouth high-efficiency Erlenmeyer flask is consistent with that
of the 3-L high-efficiency Erlenmeyer flask, and its mouth diameter adopts the
neck size of the 5-L high-efficiency Erlenmeyer flask, which not only saves
space usage, but also increase oxygen flux, so as to increase the efficiency of
cell culture.
Tips:
· Recommended volume :30-40% of the bottle volume;
· Rotation speed suggestion: the starting speed is 75-125RPM, you can control the rotation speed according to the situation;
· The liquid shake shaker should pay attention to the water level, the gas shake shaker should pay attention to the temperature;
Transfer
Cap for High Efficiency Erlenmeyer Flask
Bi-directional Liquid Transfer Cap
Bi-directional liquid transfer cap is used along with a 2L, 3L or 5L shake flask to connect a liquid inlettubing with the required device. The liquid transfer is achieved by connection of a peristaltic pump between the erlenmeyer flask and the device. Upon completion of the transfer, the transfer cap can be replaced with a vent cap for culture.
| ![]() |
Multifunctional Liquid Transfer Cap
Unlike the bi-directional liquid transfer cap, the multifunctional transfer cap can be directly placed in an incubator for culture after the liquid transfer is completed. It can reach a large air flux. The sampling part is composed of a sampling nozzle and a one-way valve, which can prevent the liquid from flowing backwards during the sampling process and ensure the aseptic sampling. The liquid inlet tubing is provided with a PTFE needle filter, which solves the issue of liquid remaining in the tubing during the feeding process.
| ![]() |
Inverted Liquid Transfer Cap
The inverted transfer cap is used along with a 2L, 3L or 5L erlenmeyer flask to connect a liquid inlet tubing with the required device. When liquid transfer is required, the liquid is transferred under gravity with the inverted erlenmeyer flask.
| ![]() ![]() |
5L Efficient Erlenmeyer Flask (with tube)
• It is pre-installed on the High Efficiency Erlenmeyer Flask, which realizes the closed transfer of liquid and reduces the risk of external
contamination during the process of capping and screwing
• The Transfer Cap comes with a large filter membrane, high oxygen flux, and no external air filter is required to ensure high-density culture of cells,
while the overall height is reduced, the applicable range of the shaker is wider, and the utilization rate of the shaker is increased.
Cat.No. |
Product Name |
Tube Information |
Tube Length |
/Case |
787081 |
5L Efficient Erlenmeyer Flask (with tube) |
TPE Thermoplastic Hose, Hose Diameter: 1/8" ID, 1/4" OD |
30 cm + 30 cm |
4 |
It is applicable to liquid transfer and culture during mass proliferation of bacteria and suspension cells.
Cat.No. | Name | Information | Pipe length | Pipe connect | /pack | /case |
785931 |
Multifunctional Liquid Transfer Cap for 2L
|
Thermoplastics Pipes
Pipe Diameter: 1/8" ID,
1/4" OD,
Pipe Connect: Aseptic
welding / Heat-seal
| 50cm | Aseptic welding heat-seal | 1 | 4 |
786931 |
Multifunctional Liquid Transfer Cap for 3L
| 50cm | Aseptic welding heat-seal | 1 | 4 | |
787931 |
Multifunctional Liquid Transfer Cap for 5L, and 3L Wide-mouth
| 92cm | Aseptic welding heat-seal | 1 | 4 | |
785921 |
Bi-directional Liquid Transfer Cap for 2L
| 50cm | Aseptic welding heat-seal | 1 | 4 | |
786921 |
Bi-directional Liquid Transfer Cap for 3L
| 50cm | Aseptic welding heat-seal | 1 | 4 | |
787921 |
Bi-directional Liquid Transfer Cap for 5L, and 3L Wide-mouth
| 92cm | Aseptic welding heat-seal | 1 | 4 | |
785941 |
Inverted Liquid Transfer Cap for 2L
| 50cm | Aseptic welding heat-seal | 1 | 4 | |
786941 |
Inverted Liquid Transfer Cap for 3L
| 50cm | Aseptic welding heat-seal | 1 | 4 | |
787941 |
Inverted Liquid Transfer Cap for 5L, and 3L Wide-mouth
| 92cm | Aseptic welding heat-seal | 1 | 4 | |
785951 |
Inverted Liquid Transfer Cap for 2L, Thick Outlet Pipe
|
Thermoplastics Pipes
Pipe Diameter: 1/4" ID,
7/16"OD,
Pipe Connect: Aseptic welding
/ Heat-seal
| 50cm | Aseptic welding heat-seal | 1 | 4 |
786951 |
Inverted Liquid Transfer Cap for 3L, Thick Outlet Pipe
| 50cm | Aseptic welding heat-seal | 1 | 4 | |
787951 |
Inverted Liquid Transfer Cap for 5L, and 3L Wide-mouth, Thick Outlet Pipe
| 92cm | Aseptic welding heat-seal | 1 | 4 |
Add : No. 530, Xida Road, Meicun Industrial Park, Xinwu District, Wuxi, Jiangsu, China
Tel : +86-510-6800 6788
E-mail : info@nest-wuxi.com
© Wuxi NEST Biotechnology Co., Ltd. All Rights Reserved. ICP Record No.12039766